EasyManua.ls Logo

senseFly eBee - Page 29

senseFly eBee
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Executing a flight
4. Verify that the wing struts are not split or damaged in any way.
5. Verify that the tubes within the Central Body that hold the wing struts are
not cracked or damaged in any way.
Caution: It is vital to carefully inspect the wing struts and tubes
within the Central Body before every flight, as they may cause a crash
if they are damaged in any way. This is particularly important if the
wings were found separated from the Central Body after a previous
flight.
6. Verify that the power cables within the battery compartment are well insu-
lated and not damaged.
Note: A general inspection should be performed before every flight.
It is also good practice to perform a full airframe check regularly to
keep your eBee in good shape. See section ‘Full airframe and sensor
inspection’ on page 131 for more details.
29

Table of Contents

Related product manuals