Sentec LuMon System - Page 41

LuMon Monitor GUI
for the LuMon System
41 of 93
NOTE
Entering ound Lung Contours , which should only be used for
troubleshooting and not during monitoring. Enter actual (not lean or ideal) body weight in kg.
6.7.2 System related operator-adjustable parameters
Table 6-7: System related operator-adjustable parameters. Refer to Figure 6-8.
Parameter
Range
Power-on default
Time (hh:mm:ss)
-
Last setting
Date (YY-MM-DD)
-
Last setting
Time format
12h/24h
Last setting 24h is the factory default
Language
dansk, deutsch, english, español, français, italiano,
nederlands, norsk, português, svenska, suomi, türkçe,
japanese
Last setting English is the factory default
NOTE
EIT data stored in the LuMon Monitor ed when changing its date/time. No
further operator confirmation will be requested at the time of the change.
6.7.3 Measurement related operator-adjustable parameters
Table 6-8: Measurement related operator-adjustable parameters. Refer to Figure 6-4 and Figure 6-6.
Parameter
Range
Power-on default
Analysis Mode
BB/TB-I/TB-II
BB
Time range for trends
5/15/30 min
1/6/24 h
Refer to Figure 6-4 for information on when new trend
points are plotted.
5 min
Time range for
Plethysmogram
10/30/60/300 s
30 s