To export a n backu the internal memory of the LuMon Monitor on a USB memory
device connected to the LuMon Monitor
• activate the window export in the et of ScoutView (Figure 6-8) and touch on
to activate data export (note that is dimmed grey if no USB memory device is
connected)
• data export progress will be indicated in a progress bar. Wait until the data export is finished or touch
on to abort.
• Do will be displayed once data export is finished
b *.lbk) file may also be used for troubleshooting purposes (12) and you may be asked to
send it to Sentec. Other than the gender, weight, height, and underbust girth, it does not contain patient data.
NOTE
EIT data
stored in the LuMon Monitor nal memory will be deleted when changing its date/time. No
further operator confirmation will be requested at the time of the change.
9.12.3 Exporting the event Log file from the internal memory of the LuMon Monitor
The LuMon Monitor stores in its internal memory a log of the occurrence of, among others, status messages,
errors, system settings or system status changes in the so-called nitorLog. Each time a USB
memory device is connected to the LuMon Monitor th d onto the USB
memory device.
ses (12) and you may be asked to send
it to Sentec. Other than the gender, weight, height, and underbust girth, it does not contain patient data.
9.12.4 Available software for data analysis
EIT Data
and operator events stored on the USB memory stick can subsequently be imported into different
analysis tools as briefly summarized below:
• ibeX Software can import *.zri and *.lbk files for subsequent display, analysis and reporting. Sequences
can be selected from the
Plethysmogram
. The main
Analysis Modes
are:
Region of Interest
silent
spaces , and stretch . It features advanced analysis tools such as custom filters, and can export result
as PDF, XLS or video. ibeX Software is currently for research use only, and some of the
indices
it
displays may differ from values computed and shown by the LuMon
TM
Monitor. Contact Sentec EIT
for additional information on ibeX Software.
• STEM Light Software can import and replay *.eit files. The quality of the measurement can be
evaluated with the following views: electrode contact impedance bar chart, U-shape average plot,
voltage
Plethysmogram
, IQ plot and voltage spectrum plot. STEM Light Software also includes a
simplified image reconstruction and image display feature. STEM Light Software is currently for
research use only. Contact Sentec EIT for additional information on STEM Light Software.
• EIDOORS can import *.eit files. EIDOORS is an open-source Matlab-based scripts package
developed and maintained by the EIT community ( http://eidors3d.sourceforge.net/
Index
.shtml ).
To Next Page
Loading...
