CDHD Configuration and Operation
User Manual 37
4.6.18 Faults
The Faults screen shows a list of drive faults. This information allows you to
identify problems and take measures to correct them.
4.6.19 Parameters Table
The Parameters Table displays and allows you to modify the drive parameters.
The parameters are grouped according to function. For each parameter you can
find a description, units, maximum value, minimum value, and current value.
In this screen you can also download parameters from the drive, upload
parameters to the drive, load parameters from a file, and save parameters to a
file.
4.7 ServoStudio Expert View
The Expert View screen lets you perform the following tasks:
Send terminal commands to the drive
Change operation mode and initiate motion accordingly
Monitor parameters using a watch pane
Set recording properties
Set chart display properties
Run scripts
To Next Page
Loading...
