33
INSTALLING THE "AJ-6000 SERIES DRIVER"
Installing onto Windows NT 4.0
1
Make sure that the unit is connected to your computer.
2
Turn on the unit, and then turn on your computer.
3
Insert the supplied CD-ROM into your CD-ROM drive.
4
Click the "Start" button, and select "Run".
5
Type "D:\DRIVERS\MFP-PS\NEUTRAL\SETUP\SETUP.EXE", and
then click the "OK" button.
(Change "D" to correspond to the letter of your CD-ROM drive.)
The setup program will start to copy the files.
6
Restart your computer.
You have completed the installation of the AJ-6000 series driver.
After installing the AJ-6000 series driver, install AJ-6000 series software referring
to page 37.
To Next Page
Loading...
