7. Reload the removed paper into the tray, and then push the tray carefully into the printer
until it clicks into place.
8. Insert the plug of the power cord into the wall socket securely. Connect all the interface
cables that were removed.
9. Turn on the power switch.
• If jams or multi-sheet feeds occur after cleaning the friction pad, contact your sales or service
representative.
• If the optional tray 2 is installed, clean its friction pad and paper feed roller in the same way as you
did for tray 1.
7. Cleaning the Printer
112
To Next Page
Loading...
Need help?
General
