Sharp DX-C200P - Using the Printer Again after It Has Been Inactive for a Long Period

3. Pull the opening lever on the front cover, and then carefully lower the front cover.
CER013
4. Lower the fusing unit levers with thumb fingers.
CER042
5. Close the front cover with both hands carefully.
CER234
• This step is not necessary if the printer's power switch is on but the printer has been inactive for a
long time.
Using the Printer Again after it has been Inactive for a Long Period
Use the following procedure to start using the printer again after it has been inactive for a long period.
10. Appendix
146