• The machine may make a noise while initializing. This noise does not indicate a malfunction.
Selecting the Display Language
Select a language using the procedure described here. The message for the selected language will
appear on the display. If you want to use the display in English, the following procedures are
unnecessary.
• The default setting is English.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to display [Language], and then press the [OK] key.
Menu:
Language
3. Press the [ ] or [ ] key to select the language, and then press the [OK] key.
Language:
English
4. Press the [Menu] key to return to the initial screen.
Test Printing
The following explains the procedure for performing a test print.
Perform the test print to verify the printer is working normally. Test printing checks printer performance
only; it does not test the connection to the computer.
1. Press the [Menu] key.
2. Installing the Printer and Options
30
To Next Page
Loading...
Need help?
General
