Setting the paper type
Use the printer driver or control panel to specify the paper type you want to use.
Printer driver
On the printer driver screen, click the [Paper] tab, and then select a paper type under [Paper
Type:].
For details about the printer driver, see Help for the driver.
Control Panel
Press the [Menu] key, and then specify the paper type that you want to use by selecting a [Paper
Type] at [Paper Input].
For details, see p.77 "Specifying a paper type for Tray 1 and Tray 2" and p.82 "Specifying a
paper type for the bypass tray".
Specifications of Paper Types
The following tables describe the types of paper that can be used with this printer.
• Depending on the paper type, the toner may take a while to dry. Before handling, make sure
printed sheets have fully dried. Otherwise, the toner may smudge.
• Print quality can be guaranteed only if recommended paper is used. For more information about
recommended paper, contact your sales or service representative.
Middle Thick
Item Description
Paper thickness 75 to 90 g/m
2
(20 to 24 lb.)
Supported paper tray Any input tray can be used.
Duplex supported size A4, B5 JIS, Legal (8
1
/
2
" × 14 "), Letter (8
1
/
2
" × 11 "), Executive (7
1
/
4
"
× 10
1
/
2
"), 8 " × 13 ", 8
1
/
2
" × 13 ", Folio (8
1
/
4
" × 13 "), 16K (195 mm
× 267 mm)
Thick Paper 1
Item Description
Paper thickness 91 to 105 g/m
2
(24 to 28 lb.)
Supported paper tray Any input tray can be used.
Duplex supported size None
5. Paper and Other Media
56
To Next Page
Loading...
Need help?
General
