1. [Stop/Start] key
If you press this key, the printer stops receiving data, and printing is not possible.
2. [Job Reset] key
Press this key to cancel a job that is printing out.
3. [Menu] key
Press this key to make and check the current printer settings.
Press the [Menu] key again to return to the ready condition.
4. Display
Displays current printer status and error message.
5. [Escape] key
Press this key to cancel an operation or to return to the previous display.
6. [OK] key
Press this key to confirm settings and setting values, or move to the next menu level.
7. Scroll Keys
Press to move the cursor in each direction, step by step.
8. Data In Indicator
Flashes when the printer is receiving data from a computer. The data indicator is lit if there is data to be
printed.
9. Alert Indicator
Lights up in red whenever printer error occurs. Use display to check the error. Flashes in yellow when toner is
nearly empty.
10. Power Indicator
Remains lit while the power is on. It is unlit when the power is off.
1. Guide to the Printer
16
To Next Page
Loading...
Need help?
General
