9. Removing Misfed Paper
This chapter explains how to remove misfed paper.
When Paper is Jammed
If a paper jam occurs, the Alert indicator on the control panel flashes and one of the following messages
appears on the control panel:
"Internal Misfeed"
"Misfeed: PprTray"
"Misfeed: Tray 1"
"Misfeed: Tray 2"
"Misfd: Dupl Unit"
"Misfd: Stnd Tray"
Open the front cover, and check the following locations for the paper jam.
• The inside of this printer becomes very hot. Do not touch parts labelled " " (indicating a hot
surface).
• Some of this machine's internal components get very hot. For this reason, take care when
removing misfed paper. Not doing so could result in burns.
• Misfed paper may be covered in toner. Be careful not to get toner on your hands or clothes.
• Toner on prints made after removing misfed paper may be loose (inadequately fused). Make a few
test prints until smudges no longer appear.
• Do not forcefully remove misfed paper, it will tear. Torn pieces remaining inside the printer will
cause further misfeeds and possibly damage the printer.
• Paper jams can cause pages to be lost. Check your print job for missing pages and reprint any
pages that did not print out.
137
To Next Page
Loading...
Need help?
General
