• Do not pull out the paper tray (Tray 1).
• If paper is jammed in Tray 2 but is difficult to locate, pull out Tray 2 to remove it. After removing the
paper, carefully push Tray 2 all the way back inside the printer.
• When closing the front cover, push the upper side of the cover firmly. After closing the cover, check
that the error is cleared.
When "Misfd: Dupl Unit" Appears
"Misfd: Dupl Unit" appears when a paper jam has occurred in the duplex unit.
Open the front cover and remove the paper.
1. Pull the opening lever on the front cover, and then carefully lower the front cover.
To Next Page
Loading...
Need help?
General
