• To correctly specify the length of an envelope whose flap opens along its short edge, be sure to
include the open flap when measuring.
• Fan envelopes, and then align their edges before loading.
• When fanning envelopes, make sure they are not stuck together. If they are stuck together,
separate them.
• When fanning envelopes, make sure the envelope flaps are not stuck together. If they are stuck
together, separate them.
• Before loading envelopes, flatten them out so that their curl does not exceed that shown in the
illustration below.
• If the curl is severe, flatten out the envelopes using your fingers, as shown in the illustration below.
Paper Recommendations
61
To Next Page
