• Be sure to load envelopes so that their flaps are on the right or front. If you do not, the envelopes
will become creased.
• If printed envelopes come out badly creased, load the envelopes in the opposite direction, and
then rotate the print object by 180 degrees using the printer driver before printing. For details, see
the printer driver Help.
• For details about paper types supported by the machine, see p.51 "Paper and Other Media".
• For details about the paper settings, see p.74 "Setting a paper size using the control panel" and
p.82 "Specifying a paper type for the bypass tray".
Loading Paper
91
To Next Page
Loading...
Need help?
General
