20
Switching the digital audio format
(D-TV only)
If multi sound modes are received, each time you press
MPX the mode switches as follows.
Audio (ENG) STEREO
L/R LRLR
CH A CH B CH AB
Audio (ENG) CH A
Audio (ENG) MONO
Press c/d to select L or R sound when the STEREO or
DUAL MONO screen is displayed.
Audio (ENG) STEREO
L/R LRLR
NOTE
• The sound mode screen disappears in 6 seconds.
• Selectable items vary depending on the received broadcasts.
Switching the analogue audio
format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
MPX
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches between
NICAM STEREO and MONO.
Stereo mode
A-TV
STEREO
A-TV
MONO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and MONO.
Bilingual mode
A-TV
MONO
A-TV
CH AB
A-TV
CH A
A-TV
CH B
When receiving a monaural signal
Each time you press MPX, the mode switches between
NICAM MONO and MONO.
Monaural mode
A-TV
MONO
A-TV
MONO
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches between
STEREO and MONO.
Stereo mode
A-TV
MONO
A-TV
STEREO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
CH A, CH B and CH AB.
Bilingual mode
A-TV
CH A
A-TV
CH B
A-TV
CH AB
When receiving a monaural signal
When you press MPX, “MONO” displays.
Monaural mode
A-TV
MONO
NOTE
• “BBC1”, “01” and “PAL” are tentative network name, channel
and colour system.
Watching TV
LC-6070UD1H_EN_book.indb 20LC-6070UD1H_EN_book.indb 20 1/2/2014 8:57:05 AM1/2/2014 8:57:05 AM
To Next Page
Loading...
Need help?
General