66
Connecting a PC
HDMI connection
PC HDMI 1, 2, 3 or 4 terminals
n
n HDMI-certified cable
(commercially available)
PC HDMI 2 terminal*
o
p
o DVI/HDMI cable
(commercially available)
p 3.5 mm stereo minijack
cable (commercially
available)
* When using the HDMI 2 terminal, you must select the proper item
in the “Audio select” menu depending on the type of HDMI cable
connected (refer to page 46 for details).
Analogue connection
PC PC terminal*
q
r
q RGB cable
(commercially available)
r 3.5 mm stereo minijack
cable (commercially
available)
PC PC terminal*
s
t
s DVI/RGB conversion cable
(commercially available)
t 3.5 mm stereo minijack
cable (commercially
available)
* When using the PC terminal, you must select “Video + Audio” in the
“Audio select” menu (refer to page 46 for details).
NOTE
• Refer to page 67 for a list of PC signals compatible with the TV.
Displaying a PC image on the screen
Selecting the picture size
You can select the picture size.
1 Press WIDE.
• The “Wide mode” menu displays.
2 Press WIDE or a/b to select the desired item.
EXAMPLE
Input signal
1024g768 1360g768
Normal
Keeps the original aspect
ratio in a full screen display.
Cinema
For viewing wide screen
programmes. The top
and bottom of the image
is slightly cropped (only
1024g768 signals).
Full
An image fully fills the
screen.
Original
Displays with the image
adjusted optimally.
Noise may appear on the
edge of the screen with
some programmes.
NOTE
• You can also select an item from “HOME” > “TV Menu” >
“Setup” > “Option” > “Option for view” > “Wide mode”.
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
• You may not be able to change the wide mode while in 3D
mode.
• Refer to page 45 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p/4K
ANALOGUE RGB: 576p/720p (50 Hz)/1080i
• The PC terminal is not compatible with 480i/576i/1080p
signals.
Connecting a PC
LC-6070UD1H_EN_book.indb 66LC-6070UD1H_EN_book.indb 66 1/2/2014 8:57:27 AM1/2/2014 8:57:27 AM