2-35
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Specifying the orientation and size of a non-standard size originals
1
Tap the [Original] key to set the orientation of the original.
► COPY MODE (page 2-3)
2
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 2-5)
3
Tap the [Original] key.
4
Tap the [Direct Entry] tab.
5
Specify the original size.
• Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
• It is convenient to use to finely adjust the entered size.
6
Tap the [Execute] key.
On the base screen, check that the specified size is displayed on the [Original] key.
After the settings are completed, tap .
4
3
68
Proof Copy
8½x11 8½x11
8½x14
11x17
Preview
Start
Original
Others
Auto
Direct Entry
InchAB Custom Size
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
Background Adjustment
2-Sided Copy
Color Mode
Start
8½x11
11
11
(1
῀
17)
inch
X
Y
Execute
1
CA
B/W
Image Orientation
No. of copies
(1
῀
17)
inch
Color
To Next Page
Loading...
