2-51
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Saddle stitching for sorted copies
This function staples each set of copies at two positions in the center of paper, folds them in half, and outputs them. For
saddle folding, it trims a side drop, offering a good-looking output image.
The setting procedure in normal mode is explained.
Saddle stitch
• You can view staple positions in "PREVIEW SCREEN (page 1-17)".
• A saddle stitch finisher is required to use the saddle stitch function.
• The trimmer function is available when a trimmer unit is installed on the machine.
1
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 2-5)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
2
Tap the [Output] key.
3
Tap the [Staple] tab, and tap the
[Saddle Stitch] key.
5
6
Offset
Saddle
Stitch
Trimmer
Setting
Punch FoldStaple
Output
Start Start
B/W
Preview
Others
CA
4
3
68
Proof Copy
8½x11 8½x11
8½x14
11x17
1
Off
1 Staple
2 Staples
Original
No. of copies
Output Tray
Lower Tray
Default Settings
Middle
Tray
Upper Tray
Erase Shadow Around
Erase
Change Size/Direction.
Original
Shift Position to Have Margin
Margin Shift
Put Multiple Pages in A Page
N-Up
Color
To Next Page
Loading...
