2-54
COPIER►BASIC PROCEDURE FOR MAKING COPIES
The setting procedure in normal mode is explained.
1
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 2-5)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
2
Tap the [Output] key.
3
Tap the [Punch] tab, and tap the punch
you want to use.
Tap the [Original] key to chenge the original settings.
Punch position can be selected from "Position".
After the settings are completed, tap .
To cancel the punch function:
Tap the [Off] key.
Start Start
Preview
Erase Shadow Around
Erase
2-Sided Copy
Change Size/Direction.
Original
CA
B/W
Shift Position to Have Margin
Margin Shift
Put Multiple Pages in A Page
N-Up
Proof Copy
Others
No. of copies
4
3
68
1
8½x11 8½x11
8½x14
11x17
Color
Original
Output
Upper Tray
Output Tray
Middle Tray
Lower Tray
Staple
Original
Punch
Right
To p
Left
Fold
2/3-Hole
Punch
Default Settings
Off
Offset
To Next Page
Loading...
