Sharp MX-7090N

7-90
SYSTEM SETTINGS►SYSTEM SETTINGS
Disable Registering Destination on Web Page
Disables to store the destination from Setting mode (Web version).
Configure the setting for each of the following items:
• Group (Direct Entry)
• Group (Address Book)
• Contacts
Select All: Selects all items.
Clear Checked: Clears all selections.
Disable Registration/Delection of All Program Items
This is used to prohibit the deletion and changing of image send settings stored in job programs.
Disable Destination Registration Using Global Address Search
This disables address control from the global address search.
Configure the setting for each of the following items:
E-mail
Disabling of Forwarding via Network
This prohibits inbound routing.
Settings to Disable Transmission
These settings are used to disable the following transmission operations.
Disable [Resend] on Image Send Mode
This setting disables the [Resend] key in the base screen of image send mode.
Disable Selection from Address Book
Disables the selection of destinations from the address book.
Configure the setting for each of the following items:
•E-Mail
• FTP
• Network Folder
Select All: Selects all items.
Clear Checked: Clears all selections.
Disable Direct Entry
Disables the direct entry of destination address and others.
Configure the setting for each of the following items:
•E-Mail
• Network Folder
Select All: Selects all items.
Clear Checked: Clears all selections.
Disabling of PC Scan
This prohibits PC Scan transmission.
Disable Storing to External Memory Device
Disables to store to the external memory device.
Disabling of Find My Address
This prohibits Find My Address.