Sharp MX-7090N - Page 736

7-139
SYSTEM SETTINGS►SYSTEM SETTINGS
Proxy Setting
Access the network through a proxy server.
Settings
Device Web Page Setting
The following explains the access settings to Setting mode (Web version).
Number of Users who can Log-in at the Same Time
Enter a number of users who can access Setting mode (Web version) simultaneously.
Auto Logout Time
Enter a time to automatically log out when no communication continues with the machine.
View Login User
The user or users who have logged in this machine are displayed.
Current Login User
The currently logged in users are displayed.
Logout All Users
The current login users are logged out.
Item Description
Proxy Setting Set whether proxy settings are used.
Proxy Server Address Enter the proxy server address.
User Name Enter a user name to access the proxy server.
Password Enter a password to allow access to the proxy server.
Port Number Enter the proxy server port number.
Address without Using Proxy
Specify exception addresses for a proxy that is used in the external service connect
function and Sharp OSA.
[Entry method]
1) Can be set using a host name or an IP address.
2) When using a host name, you can use a wildcard (*) at the beginning of the domain
name.
(Example: "*example.□□□" (equivalent to "example.□□□", "sub.example.□□□",
"subexample.□□□", etc.)
3) When using an IP address, you can use a wildcard (*) at the end of the address.
(Example: "10*" (equivalent to 100.nnn.nnn.nnn to 109.nnn.nnn.nnn)
If the Sharp OSA application using "HTML Browser 3.5" is set to an exception address,
rule (3) cannot be used.
4) You can use a separator (semicolon (;)) to enter multiple addresses.
(Example: "99.99.99.99;example.□□□")
When settings are changed, the changes will take effect after the machine is restarted. To restart the machine, see
"TURNING ON THE POWER (page 1-10)
".
When settings are changed, the changes will take effect after the machine is restarted. To restart the machine, see
"TURNING ON THE POWER (page 1-10)
".