4-9
FACSIMILE►BASIC TRANSMISSION METHODS
5
Dial the fax number.
• The entered number appears in the message display. Up to 50 digits can be entered. If you make a mistake, press the
[C] key and then enter the correct number.
• Redialing and automatic dialing can also be used (►page 4-6
, ►page 4-12).
• To enter a pause, see Entering a pause (page 4-11)
.
6
Press the [OK] key.
7
When the reenter screen appears, reenter the fax number.
► ADDRESS REVIEW FUNCTION (page 4-7)
8
Press the [OK] key.
9
Press the [START] key.
Scanning begins.
If scanning is completed normally, the display returns to the base screen.
• If the line is free, the machine will dial the receiving machine and begin transmission as soon as the first page is
scanned.
► Quick On-line (page 4-17)
• If there is a previously stored job or a job is in progress, or if the line is being used, all pages of the original are
scanned into memory and stored as a transmission job. (This is called memory transmission: the destination is
automatically called and the document transmitted after previously stored jobs are completed.)
To Next Page
Loading...
