Sharp MX-M314N - Page 101

MX-M264U SIMULATION 6 – 27
2) Press [OK] key.
The set value in step 1) is saved.
26-56
Purpose
Setting
Function (Purpose)
Used to set ON/OFF of the Life Correction.
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
26-65
Purpose
Setting
Function (Purpose)
Used to set the finisher alarm mode.
Section
Operation/Procedure
Use the touch key to set.
26-69
Purpose
Setting
Function (Purpose)
Used to set the operating conditions for
toner near end.
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2 is saved.
Destination Default
U.S.A 0 (Counted)
CANADA 0 (Counted)
INCH 0 (Counted)
JAPAN 1 (Not counted)
AB_B 0 (Counted)
EUROPE 0 (Counted)
U.K. 0 (Counted)
AUS. 1 (Not counted)
AB_A 0 (Counted)
CHINA 0 (Counted)
Item/Display Content
Setting
range
Default
value
A AUTO1 Life correction of Auto 1 is
turned ON.
0 - 1 1 1 (ON)
Life correction of Auto 1 is
turned OFF.
0
B AUTO2 Life correction of Auto 2 is
turned ON.
0 - 1 1 1 (ON)
Life correction of Auto 2 is
turned OFF.
0
C TEXT Life correction of Text is
turned ON.
0 - 1 1 0 (OFF)
Life correction of Text is
turned OFF.
0
D TEXT/
PRINTED
PHOTO
Life correction of Text/Printed
Photo is turned ON.
0 - 1 1 0 (OFF)
Life correction of Text/Printed
Photo is turned OFF.
0
E TEXT/
PHOTO
Life correction of Text/
Photograph is turned ON.
0 - 1 1 0 (OFF)
Life correction of Text/
Photograph is turned OFF.
0
F PRINTED
PHOTO
Life correction of Printed
Photo is turned ON.
0 - 1 1 1 (ON)
Life correction of Printed
Photo is turned OFF.
0
GPHOTOG
RAPH
Life correction of Photograph
is turned ON.
0 - 1 1 1 (ON)
Life correction of Photograph
is turned OFF.
0
H MAP Life correction of Map is
turned ON.
0 - 1 1 0 (OFF)
Life correction of Map is
turned OFF.
0
Item
Set
value
Content
Setting
range
Default
value
NOTE
LIMIT
COPIES
ON Number of
sets of
stapling:
Max. 50 sets
ON or
OFF
ON
OFF Number of
sets of
stapling:
Not Limited
Item/Display Content
Setting
range
Default
value
ATONER
PREPARATION
(0:YES 1:NO)
0 The toner
preparation
message is
displayed.
0 - 1 List of
Default
values and
set values
for each
destination
1 The toner
preparation
message is not
displayed.
B REMAINING
TONER
LEVEL
0.05 0 Toner
preparation at
remaining toner
level of 5%
0 - 9 4
0.1 1 Toner
preparation at
remaining toner
level of 10%
0.15 2 Toner
preparation at
remaining toner
level of 15%
0.2 3 Toner
preparation at
remaining toner
level of 20%
0.25 4 Toner
preparation at
remaining toner
level of 25%
0.3 5 Toner
preparation at
remaining toner
level of 30%
0.35 6 Toner
preparation at
remaining toner
level of 35%
0.4 7 Toner
preparation at
remaining toner
level of 40%