70
PAPER FOLDING FUNCTION
When the paper folding unit is installed, output can be folded to reduce the paper size by a half.
Paper sizes that can be folded using the paper folding function are 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17", A4R, B4, and
A3.
For detailed information on the sizes and types of paper that can be folded, see the specifications in the Safety Guide.
When the fold function is selected, folding will take place automatically when one of the above paper sizes is loaded.
PAPER LOADING ORIENTATION (FOR FOLDING)
To have the paper folded at the desired position when using manual finishing, load the paper in the inserter in the
appropriate orientation below.
Loaded paper size Paper size after folding
8-1/2" x 11"R 5-1/2" x 8-1/2"
8-1/2" x 14 7" x 8-1/2"
11" x 17" 8-1/2" x 11"
A4R A5
B4 B5
A3 A4
• Special media such as transparency film and tab paper cannot be used.
• When folding 8-1/2" x 11"R, 8-1/2" x 14", or A4R paper, the staple function cannot be used.
• When the paper folding function is selected, saddle stitch or hole punch function cannot be used.
Fold in
Fold out
AB
AB
A
B
A
B
To Next Page
Loading...
Need help?
General
