Sharp SF-1116 - Misfeed Removal

59
OPTIONAL EQUIPMENT
Misfeed removal
The copier will stop when a misfeed occurs. The misfeed ( )
indicator will blink and blinking red misfeed location indicators will
indicate the approximate misfeed location.
10-BIN SORTER (SF-S17N)
10-bin sorter (SF-S17N)
3
Slide the sorter back toward the copier and latch it into
place.
4
Open and close the front cover to cancel the indicator.
●
If the indicator is still blinking, check the inside of the copier
and remove any remaining misfed paper.
SF-S17N 10-bin sorter
1
Pull the sorter lock lever and carefully slide the sorter
away from the copier.
2
Remove the misfed paper from the sorter or from the exit
area of the copier.