55
OPTIONAL EQUIPMENT
10-BIN STAPLE SORTER (SF-S54)
Using the document glass
1
Set the original on the document glass with the corner
to be stapled to the upper right.
●
Copy from the last page to the first page.
●
If the number of copies to be delivered into each bin is more than
30 for A5, A4 or A4R (5-1/2" x 8-1/2", 8-1/2" x 11" or 8-1/2" x
11"R) paper or 15 for B4 or A3 (8-1/2" x 14" or 11" x 17") paper,
the orange indicator on the staple sorter will light up. Do not
staple the copies in this case.
2
Press the SORTER ( / / ) key to select the
SORT (
) mode.
●
Make sure that there is no paper in any sort bin before selecting
the SORT ( ) mode.
●
When using the document glass, the STAPLE SORT ( )
mode cannot be selected.
3
Set the number of copies.
●
Up to 10 sets can be made.
4
Press the print ( ) button.
5
When all copies are made and sorted, press the manual
staple key.
●
Each set of copies will be stapled.
●
Sets of copies containing copies of different width will not be
stapled.
Staple sort (SF-S54)
The STAPLE SORT ( ) mode staples copies of A5, A4, A4R,
B4, and A3 (5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14",
and 11" x 17") sizes.
●
In some areas, 8-1/2" x 13" size copies can be stapled.
10-bin staple sorter (SF-S54)
Stapling location
To Next Page
Loading...
