<P=002>
Speed Dialing
Speed Dialing can be used to dial any number that has been stored for
Automatic Dialing.
1
Load the document(s).
The display will show:
READY TO SEND
•
••
• Set the resolution and/or contrast if
desired.
RESOLUTION
2
Press the SPEED DIAL key and then
enter the two digits of the Speed Dial
number by pressing the number keys.
•
••
• To enter numbers 1 through 9, first
enter 0 and then the number.
SPEED DIAL
2 0
(Example)
3
Check the display. If the name or number
shown is correct, press the START key.
(If not, press the STOP key and then
repeat Step 2.)
START
2. Sending
Documents
Sending a Fax by Automatic Dialing
35
To Next Page
Loading...
Need help?
General
