<P=003>
Direct Keypad Dialing
You can also enter a full number with the number keys and then press the
START key to begin dialing. You can use this method to dial a full number
when you don’t need to speak to the other party before faxing.
1
Load the document(s).
The display will show:
READY TO SEND
•
••
• Set the resolution and/or contrast if
desired.
RESOLUTION
2
Enter the number of the receiving
machine by pressing the number keys.
•
••
• If a pause is required between any of
the digits to access a special service or
an outside line, press the REDIAL key
(two seconds per pause). Several pauses
can be entered in a row.
2
5
8
GHI
JKL
MNO
TUV
WXYZ
PQRS
ABC
DEF
1
4
7
3
6
9
3
Check the display. If the number of the
receiving machine shown is correct, press
the START key.
•
••
• If it is not correct, press the STOP key
to backspace and clear one digit at a
time, and then re-enter the correct
digit(s).
START
Sending a Fax by Automatic Dialing
36
To Next Page
Loading...
Need help?
General
