UX178U-BOCY
RT
<P=001>
Chapter
4
Making
Copies
Your fax can also be used to make copies. You can use this function to make
a sample copy of a document before transmitting it to see if the resolution or
contrast needs adjustment.
♦ The default resolution for copying is FINE.
1
Load the document(s) face down.
The display will show:
READY TO SEND
•
••
• If desired, adjust the resolution and/or
contrast with the RESOLUTION key.
COPY/HELP
2
Press the COPY/HELP key.
Incoming calls during copying
The fax goes into manual reception mode during copying, so if a call comes
in at this time, pick up the handset to answer.
To receive a document, press the START key after copying is finished. If
you want to begin reception immediately, press the STOP key to stop
copying, and then press the START key as soon as the document has fed out
and the fax has returned to standby mode.
RESOLUTION
42
To Next Page
Loading...
Need help?
General
