UX178U-SFAJ
YF
<P=001>
Blocking Reception of Unwanted Faxes
The Anti Junk Fax function allows you to block reception of faxes from
parties which you specify. This saves paper by not printing out unwanted
"junk" faxes.
To use this function, first turn it on by setting Option Setting 13 to YES as
described in Chapter 8, and then enter the fax numbers from which you do
not want to receive faxes as shown below. If you are using the Caller ID
function, you can also enter voice numbers.
Comments:
•
••
•
Up to 5 numbers can be entered in the Anti Junk Number List.
•
••
•
The Anti Junk function will not operate for a number which has also been
stored as a Priority Call number.
•
••
•
To clear a number from the Anti Junk Number List, you need to know the
1-digit number which identifies it. If you have forgotten this number, print
out the Anti Junk Number List as described in Chapter 10.
1
Press the keys shown at right.
STORE JUNK # will appear in the
display.
2
Press 1 to store a number in the Anti Junk
Number List, or 2 to clear a number from
the list.
or
3
Storing: Enter a 1-digit number from 1 to
5. This number identifies the fax/voice
number you will store in the next step.
Clearing: Enter the number which
identifies the fax/voice number you want
to clear, and go to Step 5.
(Example)
FUNCTION
3
1
2
1
7. Special
Functions
Blocking Reception of Unwanted Faxes
55
To Next Page
Loading...
Need help?
General
