Sharp UX-178 - Option Settings; Setting 1: Fine Resolution Priority

UX178U-OSOS
RT
<P=001>
Chapter
8
Option
Settings
The option settings let you customize your fax to better suit your needs. An
initial setting has been made for each option at the factory. You can change a
setting by following the steps described for each option below.
First press
FUNCTION
and
4
,
then press
#
or * to
scroll through the
options.
or
Setting 1: FINE RESOLUTION PRIORITY
This option sets the default resolution (the resolution used if a setting is not
made with the RESOLUTION key) for transmitting documents. Press 1
(YES) to set the default resolution to FINE, or 2 (NO) to set it to STANDARD.
•
Initial setting: 2
FUNCTION
4
STOP
FUNCTION
4
Display
will show:
FINE PRIORITY
2
1
YES NO
or
NUMBER OF RINGS
62