Problems and Solutions
102
Answering machine connection
Problem Solution
The answering machine
connection does not
operate properly.
• Make sure your machine's reception mode is set to
A.M..
• Make sure your machine's TEL. LINE jack is
connected to the wall jack. Make sure your machine's
TEL. SET jack is connected to your answering
machine's telephone line jack (not the answering
machine's extension phone jack).
• Make sure your answering machine's outgoing
message is under 10 seconds.
• Make sure that the Quiet Detect Time setting is set to
three or four seconds (see page 68).
• Make sure that the Distinctive Ring function is set to
OFF SETTING (see page 77).
• If you have checked all of the above and the
connection still doesn't operate properly, call the
Customer Assistance Center.
all.bookPage102Wednesday,December11,200211:25AM
To Next Page
Loading...
Need help?
General
