Sharp UX-B700

Sending a Fax by Automatic Dialing
43
2. Sending
Faxes
Editing and clearing auto-dial numbers
If you need to make changes to a previously stored auto-dial number, or clear
a number, follow these steps:
1 Press once and once.
2 Enter the 2-digit Speed Dial number that you wish to edit or clear (for
example, press ), or press or until the number
appears in the display.
3 Press .
4 Press for EDIT or for CLEAR.
• If you selected CLEAR, go to Step 8.
5 If you selected EDIT, make the desired changes to the number.
• Press or to move the cursor to the digit or digits you wish to
change, and then enter the new digit. The new digit will replace the old
digit.
• If you do not wish to change the number, go directly to Step 6.
FUNCTION
0 1
1
2
Display:
1=EDIT, 2=CLEAR
<NEW NUMBER>
7 Return to Step 2 to store another number, or press to return to the
date and time display.
STOP
all.bookPage43Wednesday,December11,200211:25AM