Loading the Document
35
2. Sending
Faxes
3 Adjust the resolution and/or contrast settings as explained on page 36,
then dial the receiving machine as explained on page 39.
Removing a document from the feeder
Important!
Do not try to remove a document without opening the operation panel. This
may damage the feeder mechanism.
1 Open the operation panel.
2 Remove the document.
• If the document does not come out
easily, follow the procedure on page
106.
3 Close the operation panel, pressing
down firmly on both front corners to
make sure it clicks into place.
If you need to remove
a document from the
feeder, open the
operation panel.
all.bookPage35Wednesday,December11,200211:25AM
To Next Page
Loading...
Need help?
General
