Sharp UX-B700

Setting the Date and Time
28
Setting the Date and Time
1 Press once and twice.
2 Press once and 3 times.
3 Press .
4 Enter a two-digit number for the month (“01” for January, “02” for
February, “12” for December, etc.).
Example: January
• To correct a mistake, press to move the cursor back to the mistake and
then enter the correct number.
5 Enter a two-digit number for the day (“01” to “31”).
Example: the 5
th
FUNCTION
0 1
0 5
Display:
The currently set date
appears (example):
ENTRY MODE
DATE&TIME SET
DATE 08-15-2003
DATE 01-15-2003
DATE 01-05-2003
FUNCTION
START/
MEMORY
1 2 3
4 5 6
7 8 9
0
01 02 03 04 05 06
07 08 09 10 11 12
13 14 15 16/POLL 17/G1 18/G2
STOP
The date and time appear in the
display and are printed at the top
of every page you fax. Set the
date and time as shown below.
all.bookPage28Wednesday,December11,200211:25AM