Sharp UX-B700 - Automatic Dialing

Sending a Fax by Automatic Dialing
40
Sending a Fax by Automatic Dialing
You can dial a fax or phone number by simply pressing a Rapid Key, or by
pressing and entering a two-digit number.
♦ To use Automatic Dialing, you must first store the full fax or phone number
in your fax machine.
♦ When you store a fax or phone number, you select a two-digit Speed Dial
number for it. Ninety-nine Speed Dial numbers are available.
SPEED DIAL
5 When you hear the fax tone, press . Replace the handset.
• If the transmission is completed successfully, the machine will beep once.
• If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 87).
START/
MEMORY
Speed Dial numbers 01
through 18 are for Rapid
Key (one-touch) Dialing.
Speed Dial numbers 19
through 99 are for
dialing with .
SPEED DIAL
01
SPEED DIAL
1
9
START/
MEMORY
all.bookPage40Wednesday,December11,200211:25AM