42
450 SEF-R
❱❘ Cleaning the throttle body
• Clean the throttle body by means of a carbure-
tor cleaner spray (Net Carbu).
• Be sure to clean the edge of the throttle valve
on each side with the throttle fully opened.
• Clean the injector. Blow.
❱❘ Installing the throttle body
Reassemble the parts following the reverse order of
that of the removal, put special connector grease
inside the connections (power injector, GST, etc.).
• If you remove the inlet sleeve, pay attention
to the direction!
• Adjust the clearance of the throttle cable.
• Disconnect the computer connector. Visually
inspect the connectors.
• Clean with carburetor or universal cleaner.
• Blow.
• Apply special connector grease.
• Reconnect.
Cleaning the throttle body
To Next Page
Loading...
Need help?
General
