Chapter 2 Installation
2-24
AA-6800/6650 Instruction
4. When using the atomic muffle and performing the version-up of WizAArd
If your instrument type is not available for flame measurement (AA-6650G/6800G) and equipped with
the atomic muffle SARF-16C, performing the PC software version-up to WizAArd ver. 2.11 or later
may make the operation complicated, because an unnecessary checklist screen for starting a flame
measurement appears at every time of initialization.
To avoid this problem, remove the short plug inside the instrument. For details on the short plug, refer
to the instruction manual for adapter set for mounting the atomic muffle.
NOTE
To Next Page