Shimadzu RID-10A - Command Summary for Time Program

7.2 Control from the SCL-1OA
Marks on the recorder output.
Polarity
Cell temperature setting
Performs
zero adjustment.
Performs optical balance adjustment.
Closes reference flow lines.
-
tu
U f
%
w
- - - --
1
0 (-OFF), 0.1 40
- 1 or 1 - -
30 - 60
-- I - -
- - - --
- - -- --
(3)
Move the cursor to a desired device name in the following
line using
-1 (m) and -1 ( (f4)).
Recorder range in mode A
(x io4w
Recorder range in modes P and L
(X 104Rnr)
~ ~~
FUNCTION FOR (PUMP DET. B OTHER) I
I
0,O.Ol-500 0.01 (0.01-1) 100
1 (1-500)
0, 1-5ooo 1 100
Commands corresponding to the selected module are displayed in
the command table.
An example for the command table is shown
below:
31 RESP
134 CELL. 1144 R. CLOS146 RNG. A
32 MARK
135
ZERO 145 R. FLOW147 RNG. P
33 POL
143
BALANCl I
Command summary for time program
Parameter
pE
I -*=
I R.CLOS
I R.FLOW
I RNG.A
Description
I Settingrange 1 Minimumunit 1 Defaultvalue
Response I 1 - 10 I 1 I 5
--
I
- -
I
- -
Purges reference flow lines. I
The following operations are possible in the time program screen
using the function keys.
I I
7 - 8
- RID-1OA