Shimadzu UP2202X - Page 100

85
12. Connections and Communications with External Equipment
2
4
1
3
5
6
7
11
13
12
8
9
10
14
(vi) Commands for numeric value setting
CALWT= Sets external weights value for span calibration.*
ACALT1= Sets Clock-CAL time 1.
ACALT2= Sets Clock-CAL time 2.
ACALT3= Sets Clock-CAL time 3.
P.TA R E= Sets Pretare value.*
ZRNG= Sets Zero Range value.
UW= Sets unit weight.
USER= Sets user unit conversion coefficient.*
VO L= Sets volume of reference weight.
DENSE= Sets surrounding liquid density.
I.TIME= Sets interval timer value.*
DATE= Sets the date.
TIME= Sets the time.
TARGET= Sets the target value.
LIMIT= Sets the limit value.
L.LO= Sets the lower limit value of Checkweighing Display 1.
L.UP= Sets the upper limit value of Checkweighing Display 1.
G.LO= Sets the lower limit value of Checkweighing Display 2.
G.UP= Sets the upper limit value of Checkweighing Display 2.
PCS= Sets the arbitrary loading piece.
#= Corresponds to numeral keys of AKB-301 Application Keyboard.
ID= Sets ID.
PASSSET= Sets PCAL password.*
PASS= Inputs PCAL password.*
(vii) Commands of special functions
CAL Enters Span Calibration mode.
C18 Enters Span Calibration mode.
LOCK Sets menu lock.
RELEASE Releases menu lock.
TIME Readout of date and time.
RSTMN Menu reset.
{ Echo back.
} Echo back.
*Not applicable to a verified balance as a legal measuring instrument in using region