101(108)
filter screen of the strainer periodically.
3) Cleaning steps: turn off power and cooling water supply. Open the top cover
of filter screen to clean the filter.
Picture 6-4：Y Type Strainer
6.3 Solenoid Valve
Replace solenoid valve:
1) Open machine top cover.
2) Take down right side cover.
3) Unfix the solenoid valve for replacement.
4) Install the covers in a reverse order.
Picture 6-5：Solenoid Valve
6.4 Pipe Heater
1) Pull the black door locker downward, then draw it outward to open machine
rear cover. (Refer to pictures below)
To Next Page
Loading...
Need help?
General
