15(108)
Warning！
High temperature, take care of hands! This label is attached on the
surface of heating parts.
1.4.2 Signs and Labels
Clean the filter screen of Y type strainer
timely to avoid obstruction which may
affect machine performance.
It is used for oil heater. Max. temperature
setting of this unit is 200℃.
This is to indicate motor rotating
direction.
When phase reversal happens, the alarm
sounds and indicator on control panel will
indicate. Please exchange the place of
two of the electrical wires to solve this
problem.
High voltage! Electrical shock may
happen.
Carefulness is required from the
operator.
Attentions!
This is general warnings which operators
should pay attention to.
Oil outlet valve: oil discharge outlet for
renewing oil.
High liquid level: the highest oil level to
which machine can reach under room
temperature.
To Next Page
Loading...
Need help?
General
