99(108)
6. Maintenance and Repair
Pay attention to the following rules during maintenance:
1) Need at least two persons present when checking the machine. Let the
machine cool down, turn off power supply, drain out the oil and water. Make
sure enough place before checking and maintenance.
2) The machine works in high temperature. Stop the machine, wait it to cool
down. Put on protective gloves before servicing or maintenance.
3) In order to prolong the life of the machine and to prevent accidents, check the
machine at a fixed frequency.
4) During operation, the oil is heated up to a high temperature, wait it to fall
below 50℃ to perform repairing or maintenance. ( Please note that it is
dangerous to check or tear down the machine during operation.)
To Next Page
Loading...
Need help?
General
