104(108)
8, 9 : water out temp. sensor terminal
11, 12 : 1~5V input terminal
② DI TERMINAL (contactor input terminal)
13, 14 : pump overload contactor input terminal
15, 16 : EGO overheat contactor input terminal
17, 18 : underpressure contactor input terminal
19, 20 : overpressure contactor input terminal
21, 22 : lower water limit contactor input terminal
23, 24 : upper water limit contactor input terminal
③ OUTPUT TERMINAL (output terminal for controlling)
1, 2 : heating control output MAIN (RELAY output)
3, 4 : heating control output SUB (RELAY output)
5, 6 : coling control output (RELAY output)
④ DO TERMINAL (relay contactor output terminal)
1, 2 : pump running contactor output terminal
3, 4 : pump inverse running contactor output terminal
5, 6 : backup water contactor output terminal
7, 8 : SUCTION contactor output terminal
9, 10 : alarm contactor output terminal
11, 12 : relay contactor output terminal
13, 14 : reserve
⑤ PHASE CHECK TERMINAL (phase detect terminal)
1 : R phase connect terminal
2 : S phase connect terminal
3 : T phase connect terminal
⑥ DISPLAY CN (connect terminal for dispaly)
Connect stub cable with STM100.
⑦ POWER TERMINAL (power supply terminal)
1 : FG terminal
2, 3 : power supply terminal (100~240VAC)
To Next Page
Loading...
Need help?
General
