SHOWTEC TR-512 - 1. Introduction; 1.1. Before Using the Product; 1.2. Intended Use; 1.3. Text Conventions

4
TR-512 Install
Product code: 50826
1. Introduction
Before Using the Product
Important
Read and follow the instructions in this user manual before installing, operating or
servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your
Highlite International dealer.
Your shipment includes:
● Showtec TR-512 Install
● MicroSD card
● User manual
Fig. 01
Intended Use
This device is designed to be used as a professional DMX trigger/recorder. It is suitable for indoor
installation in an electrical enclosure.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Text Conventions
Throughout the user manual the following text conventions are used:
● Buttons: All buttons are in bold lettering, for example “Press the UP/DOWN buttons”
● References: References to chapters and parts of the device are in bold lettering, for example:
“Refer to 2. Safety”, “press the power switch (03)”
● 0–255: Defines a range of values
● Notes: Note: (in bold lettering) is followed by useful information or tips