- 9 -
Ø 2 x RJ45 LAN connector.
Ø 1 x PS/2 mouse connector.
Ø 1 x PS/2 Keyboard connector.
Ø 1 x Line-Out (Front-Out) port.
Ø 1 x Line-In (Rear-Out) port.
Ø 1 x Bass/Center-Out port.
- PCI Bus Master IDE Controller Onboard
Two Ultra DMA 100/66/33 Bus Master Dual-channel IDE ports provide sup-
port to a maximum of four IDE devices (one Master and one Slave per channel).
The IDE Bus implements data transfer speeds of up to 100/66/33 MB/sec and
also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.
- ATX Power Supply Connector
ATX power supply unit can connect to the onboard 20-pin Pentium 4 stan-
dard ATX power connectors, supporting Suspend and Soft-On/Off by dual-
function power button.
The Pentium 4 ATX power include another 2X2 4-pin +12V ATX power con-
nector.
- Advanced Configuration and Power Interface
Features four power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4
(Suspend to DISK), and S5 (Soft-Off). ACPI provides more efficient Energy
Saving Features controlled by your operating system that supports OS Direct
Power Management (OSPM) functionality.
- System BIOS
Provides licensed Award BIOS V6.0 PG on 4Mb Flash core and supports
Green PC, Desktop Management Interface (DMI).
- Form Factor
System board conforms to Shuttle from factor ATX specification.
Board dimension: 254mm x 185mm.
- Advanced Features
Ø Low EMI - Built in spread spectrum and automatic clock shut-off of
unused PCI/SDRAMS slots to reduce EMI.
To Next Page
Loading...
