Operating Instructions Chapter 11
CLV62x Bar Code Scanner
Appendix
8011965/S345/2008-04-16 © SICK AG · Division Auto Ident · Germany · All rights reserved 103
Upload
Transfer process of all parameter values from the connected bar code scanner’s working
memory to a PC in the SOPAS-ET configuration software for display and modification. This
is achieved when the device is connected and communication is successfully carried out af-
ter the scanning process for a confirmed request to synchronise the user interface and the
bar code scanner. Where necessary, this can be triggered manually in the Kommunikation
menu (U
PLOAD ALL PARAMETERS FROM DEVICE Parameter values must be represented in the reg-
ister tabs before the current parameter value set can be modified.
User interface
Windows-oriented input interfaces in the SOPAS-ET configuration software for operation
and configuration of the bar code scanner.
To Next Page
Loading...
Need help?
General
