EasyManuals Logo

SICK Lector85x Operating Instructions

SICK Lector85x
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
2.2 Intended use
The Lector85x image-based code reader is a SICK 4Dpro sensor. The product is used
for automatic, stationary identification and decoding of codes on moving or stationary
objects. The product reads 1D codes (barcodes, stacked codes) and 2D codes (matrix
codes). In read mode, the product sends the read results via the data interface to a
controller for coordinated further processing.
The base model of the product is a camera housing with C-mount thread. The product
can be assembled from individual components to suit the particular application. The
individual components can be ordered separately as accessories. Only certain lenses
and illumination units are compatible depending on the product type. Use only com‐
ponents from SICK intended for this product. Use a compatible variant of the VI83I
illumination unit as the integrated illumination.
As a complete device, the product is already equipped with pre-mounted optics (lens,
integrated illumination unit, spacer, optics protection hood).
The product is designed for use in industrial and logistics areas, and meets the require‐
ments for industrial ruggedness, interfaces and data processing.
Only use the product in industrial environments (EN 61000-6-4).
Incorrect use, improper modification, or tampering with the product will invalidate any
warranty offered by SICK AG. Furthermore, SICK AG shall not accept any responsibility
or liability for any resulting damage and consequential damage.
2.3 Improper use
Impermissible use
As a safety component as defined in the relevant applicable safety standards for
machines, e.g. Machinery Directive
Impermissible ambient conditions
Explosion-hazardous area
Corrosive environment
2.4 Cybersecurity
Overview
To protect against cybersecurity threats, it is necessary to continuously monitor and
maintain a comprehensive cybersecurity concept. A suitable concept consists of organi‐
zational, technical, procedural, electronic, and physical levels of defense and considers
suitable measures for different types of risks. The measures implemented in this
product can only support protection against cybersecurity threats if the product is used
as part of such a concept.
You will find further information at www.sick.com/psirt, e.g.:
General information on cybersecurity
Contact option for reporting vulnerabilities
Information on known vulnerabilities (security advisories)
Further topics
Interfaces
Network services and ports
Password management
SAFETY INFORMATION 2
8027859/1KN0/2023-08-02 | SICK O P E R A T I N G I N S T R U C T I O N S | Lector85x CAN I/O
9
Subject to change without notice

Other manuals for SICK Lector85x

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SICK Lector85x and is the answer not in the manual?

SICK Lector85x Specifications

General IconGeneral
BrandSICK
ModelLector85x
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals