SICK MCS300P User Manual

Product Description
MCS300P · Technical Information · 8013265 V1-2 · © SICK AG 11
Subject to change without notice
2.2 SOPAS ET (PC program)
SOPAS ET can be used to set the MCS300P parameters and provides access to the
MCS300P logbook.
SOPAS ET runs on an external PC connected via the Ethernet interface to the MCS300P
( MCS300P Operating Instructions).
2.2.1 Modbus-TCP
Modbus
®
is a communication standard for digital controls to connect a »Master« device
with several »Slave« devices. The Modbus protocol defines the communication commands
only but not their electronic transfer; therefore it can be used with different digital inter-
faces (for MCS300P: Ethernet).
Configuration: → p. 30, §3.5.3.3
2.2.2 OPC (option)
OPC is a standardized software interface that allows to exchange data between different
applications.
The SICK OPC server (part of SOPAS ET) is required.
System bus: Ethernet.
Configuration: → p. 30, §3.5.3.3

SICK MCS300P Specifications

General

Brand	SICK
Model	MCS300P
Category	Analytical Instruments
Language	English