SICK MCS300P User Manual

22 MCS300P · Technical Information · 8013265 V1-2 · © SICK AG
Operation
Subject to change without notice
3.4.3 Signals
3.4.3.1 Measuring signals
Menu: Diagnosis/Signals/Measuring signals
Measuring signals are shown in this menu.
Leave the evaluation of these signals to SICK Customer Service.
3.4.3.2 Digital signals
Menu: Diagnosis/Signals/Digital signals
3.4.3.3 Analog signals
Menu: Diagnosis/Signals/Analog signals
3.4.3.4 Real values
Menu: Diagnosis/Signals/Real values
3.4.3.5 Integer and filtered values
Menu: Diagnosis/Signals/Integer and filtered values
Parameter settings of the signals listed below: → p. 29, §3.5.3 and the following
pages.
The current states of the digital signals (DIi,
DOi, limit values) are shown in this menu.
Digital values:
. = off (0)
I = on (1)
For limit values:
. = within the limit value
I = outside the limit value
The current values of the analog signals
(AIi, AOi) are shown in this menu
The current real values (RVi) are shown in
this menu.
The current integer values (IVi) and filtered
values (FVi) are shown in this menu.

SICK MCS300P Specifications

General

Brand	SICK
Model	MCS300P
Category	Analytical Instruments
Language	English